TM 5-4310-368-14
(4)
Install and secure two screws and two nuts at each end of panel.
(5)
Secure three screws at bottom of panel.
4-20.
FUEL LINES, HOSES AND FITTINGS
This task covers:
a.
Removal
b.
Inspection
c.
Installation
INITIAL SETUP
Applicable Configurations
All
a.
Removal
(1)
Disconnect fuel line at top of fuel tank.
(2)
Disconnect fuel line at fuel selector valve or at fuel pump as applicable. Remove fuel line.
(3)
Disconnect fuel hose at fuel pump and at heater. Remove fuel hose.
(4)
Remove fuel fittings from fuel tank, fuel selector valve, fuel pump and heater.
b.
Inspection
(1)
Inspect all threaded parts and tapped holes for damaged threads. Replace defective parts.
(2)
Examine compression rings on fuel lines for cracks, damage or signs of leaks. Replace defective fuel
lines.
(3)
Examine fuel lines and hoses for cracks, splits and signs of leakage. Replace defective parts.
c.
Installation
(1)
Install fittings into fuel tank, fuel selector valve, fuel pump and heater.
(2)
Install fuel line between fuel tank and fuel pump. Secure tube nuts.
(3)
Install fuel line between fuel tank and fuel selector valve. Secure tube nuts.
4-19
