TM 5-4310-368-14
(5)
Using tachometer, check for drive belt slippage.
(6)
Adjust drive belt tension as required (paragraph 4-25).
4-25.
COMPRESSOR DRIVE BELT
This task covers:
a.
Inspection
b.
Removal
c.
Installation
INITIAL SETUP
Applicable Configurations
All
Equipment Condition
Paragraph
Condition Description
Side Access Panel Removed
Frame Underpanel Removed
a.
Inspection. Refer to operator maintenance.
b.
Removal
(1)
Loosen four engine bolts, lock nuts and flat washers.
(2)
Turn engine adjusting screw counterclockwise to loosen drive belts.
(3)
Remove drive belts.
c.
Installation
(1)
Install matched pair of drive belts onto compressor and engine pulleys.
(2)
Turn engine adjusting screw clockwise to obtain correct drive belt tension. Refer to PMCS.
(3)
Secure four engine bolts, flat washers and lock nuts.
4-24
