TM 5-4310-368-14
b.
Removal of Air Cleaner Assembly
(1)
Disconnect air duct from air cleaner housing.
(2)
Remove air inlet hood.
(3)
Loosen and remove four bolts and nuts. Remove air cleaner assembly.
(4)
Loosen and remove one screw and nut from each strap. Remove two straps.
c.
Installation
(1)
Loose assemble two straps to air cleaner assembly with one screw and one nut.
(2)
Position air cleaner assembly against underside of roof panel. Align air inlet of air cleaner with hole in
roof panel.
(3)
Align bolt holes in air cleaner straps with bolt holes in roof panel.
(4)
Secure air cleaner straps to roof panel with four bolts and four nuts.
(5)
Adjust air cleaner assembly within the straps so that the air cleaner air inlet is centered in the hole in the
roof panel. Secure two straps.
(6)
Install air inlet hood.
(7)
Connect air duct to air cleaner.
4-35.
CLUTCH AND HOUSING
This task covers:
a.
Inspection
e.
Cleaning and Inspection
b.
Adjustment
f.
Reassembly
c.
Removal
g.
Installation
d.
Disassembly
INITIAL SETUP
Applicable Configurations
All
Equipment Condition
Paragraph
Condition Description
Side Access Panel Removed
Drive Belts Removed
4-35
