TM 5-4310-368-14
Section III. MAINTENANCE INSTRUCTIONS
5-6.
This task covers:
a. Disassembly
b. Repair
c.
Reassembly
INITIAL SETUP
Applicable Configurations
All
Equipment Condition
Paragraph
Condition Description
Hose Removed
a. Disassembly
(1)
Remove service valve and fitting from service hose.
(2)
Remove quick disconnect chuck and fitting from service hose.
b. Repair. Replace all damaged or defective components.
c.
Reassembly
(1)
Apply teflon tape to quick disconnect chuck fitting. Screw fitting into chuck. Tighten fitting.
(2)
Install quick disconnect chuck and fitting onto service hose. Tighten connection.
(3)
Install service valve onto service hose. Tighten connection.
5-7.
This task covers:
a. Disassembly
b. Repair
c.
Reassembly
5-11
