TM 5-4310-368-14
b. Disassembly
(1) Remove bottom fitting.
(2) Remove fitting and reducing bushing from each air receiver.
c.
Cleaning. Clean all parts with cleaning solvent. Dry thoroughly.
d. Inspection
(1) Inspect all threaded parts and tapped holes for thread damage. Repair or replace defective parts.
(2) Inspect air receiver for cracks, dents or other damage. Verify proof test date. Retest as required.
e. Reassembly
(1) Apply teflon tape to pipe threads on bottom tube fitting.
(2) Install and secure bottom tube fitting.
NOTE
Make sure fitting is properly oriented.
(3) Apply thread sealer to pipe threads on each reducing bushing.
(4) Install and secure reducing bushings.
(5) Apply teflon tape to the pipe threads of each side tube fitting.
(6) Install and secure each side tube fitting.
NOTE
Make sure side tube fittings are properly oriented.
f.
Installation
(1) Attach lifting sling to air receiver.
(2) List air receiver into frame.
(3) Position air receiver into proper location in frame.
(4) Attach and secure three tubes.
(5) Install and secure two straps, four lock washers and four nuts.
5-44
