TM 5-4310-368-14
(3) Remove switch from instrument panel.
(4) Position switch into hole in instrument panel.
(5) Secure switch with nut and washer.
(6) Connect wiring.
NOTE
Make sure wire connections are the same as before switch replacement.
5-26.
FRAME
This task covers:
a. Disassembly
b. Reassembly
INITIAL SETUP
Applicable Configurations
All
Equipment Condition
Paragraph
Condition Description
Enclosure Removed
Instrument Panel Removed
a. Disassembly
(1) Remove engine (paragraph 5-2).
(2) Remove compressor (paragraph 5-3).
(3) Remove heater (paragraph 5-27).
(4) Remove axle assembly (paragraph 5-4).
(5) Remove fuel tank (paragraph 5-5).
(6) Remove miscellaneous equipment.
b. Reassembly
(1) Install all miscellaneous equipment.
5-49
