TM 5-4310-377-13
3-11. MOTOR STARTER BOX - Continued.
Figure 3-3. Motor Starter Box, Removal.
(1) Loosen both screws (1) and slip clamps (2) off lip of door (3) and open door (3).
(2) Tag and disconnect power source wiring.
(3) Tag and disconnect motor wiring (4).
(4) Remove nut (5) and then remove conduit (6).
(5) Tag and disconnect pressure switch wiring (7).
(6) Remove nut (8) and then remove conduit (9).
(7) Remove four nuts (10), four lockwashers (11), four bolts (12), and motor starter box (13).
GO TO NEXT PAGE
3-18
