TM 5-4310-377-13
3-11. MOTOR STARTER BOX - Continued.
Figure 3-4. Starter Box, Disassembly.
(1) Tag and disconnect wiring from on/off switch (1).
(2) Loosen two screws (2) and turn rear of switch one-quart er turn counterclockwise. Remove switch (1).
(3) Loosen two screws (4) and turn rear of RESET switch one- quarter turn counterclockwise. Remove switch
(3).
(4) Tag and disconnect wiring from the contactor (5) and the overload (6).
(5) Loosen screws connecting T1, T2, and T3 (7) on contactor (5).
(6) Remove overload assembly (6) by pulling straight down.
(8) Remove two screws (8) and contactor (5).
(9) Unhook two spring clips (9) and remove cover (10), spring (11), and coil (12).
GO TO NEXT PAGE
3-19
