TM 5-4310-377-13
3-11. MOTOR STARTER BOX - Continued.
Figure 3-6. Motor Starter Box, Installation.
(1) Install motor starter box (1) into position and secure with four bolts (2), four lockwashers (3), and four nuts
(4).
(2) Install conduit (5) into position and secure with nut (6).
(3) Connect pressure switch wiring (7) per the tagged identification.
(4) Install conduit (8) into position and secure with nut (9).
(5) Connect motor wiring (10) per the tagged identification.
(6) Connect the power source wiring per the tagged identification.
(7) Close door (11) and slip clamps (12) over lip of door. Tighten both screws (13).
END OF TASK
3-22
