TM-5-4310-389-14
13.
Place the crankcase bottom downwards.
14.
Screw in the piston cooling oil nozzles, fitted with new gaskets, on both sides of the middle bearing web.
15.
Assemble the screwed plug, fitted with a new gasket, in the oil hole in the cylinder head contacting face.
16.
Check the ball valve in the base-plate of the lubricating oil filter.
17.
If the ball valve in the base plate is damaged or missing, fit a new base-plate.
18.
Turn the engine upside down. Install a new gasket and mount the filter and cover (figure 5-23).
Figure 5-20. Installing Bore Sealing Cover
Figure 5-21. Checking Clamping Sleeves
Figure 5-22. Installing Plugs into Bearing Webs
Figure 5-23. Install Oil Filter
5-18
