TM 5-4310-451-14
5-101. AIR COMPRESSOR ASSEMBLY REPAIR.
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
áAir compressor assembly removed (see para-
áLubricating oil (Item 28, Appendix E)
graph 5-100)
áDry cleaning solvent (Item 38, Appendix E)
Tools/Test Equipment:
áSix locknuts
áGeneral mechanic’s tool kit
General Safety Instructions:
áField automotive shop set
áDry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
a. DISASSEMBLY
1.
Remove two setscrews (1) from wedgelock (9) and hub (3).
2.
Evenly pry plate (5), gear (4), and hub (3) off air compressor shaft (6). Wedgelock (9) and key (2) will also come
off.
3.
Remove six locknuts (7) and bolts (8) from hub (3), gear (4), and plate (5). Discard locknuts.
4.
Separate plate (5) and hub (3) from gear (4).
5-376
