TM 9-4310-397-14
f.
Installation.
NOTE
Terminal hardware is supplied with most components and cannot be purchased separately.
Retain all hardware if original component is not being replaced. If component is being replaced,
use new hardware supplied.
(1)
Remove hex nuts from component parts and connect terminal lug wires using wiring diagram (Figure 4-28)
and tags on wires. Remove tags.
(2)
Reinstall hex nuts on component parts.
(3)
Use tiedown electrical straps (1) and (2) to secure wiring harness (3) to system hoses to minimize loose
wires.
(4)
Connect battery cables to batteries. See paragraph 4-49.
(5)
Close roadside doors.
4-91
