TM 9-4310-397-14
(h)
Connect battery cables to batteries per paragraph 4-49.
(i)
Install cover panel channel (Figure 4-14, 15), cover panel angles (13) and (14), and secure with twenty six
flat washers (12), new lock washers (11) (item 4, appendix H), and cap screws (10).
(j)
Install dome light (9) per the following.
1
Install mounting plate (6) onto cover panel channel (15) using four pan head screws (4), flat washers
(5), and new self locking nuts (3) (item 1, appendix H).
2
Install dome light (9) onto mounting plate (6) using three rivets (8) (item 37, appendix H).
3 Install grommet (7), housing tab (2), and single circuit connector (1).
(k)
Install top panel (Figure 4-13, 3) and secure using twenty flat washers (2) and hex head screws (1).
(7)
Install muffler, piping and riser per paragraph 4-30.
(8)
Install battery cables to batteries per paragraph 4-49.
4-87
