TM 9-4310-397-14
Figure 6-22. Keeper Removal
(b)
Release spring tension and remove valve spring keeper (2) or rotator and valve spring (1).
(c)
Remove valves, marking them for reassembly. Use a valve board or other suitable means of keeping
valves in order.
(10). If valve seat inserts must be replaced, remove inserts with valve seat puller (item 12, section III, appendix
B).
(11). Disassemble rocker arm shaft assembly.
(a)
Remove plugs (Figure 6-23, 6) and bowed washers (5) from rocker arm shaft (4).
Figure 6-23. Rocker Arms, Shaft, and Push Rods
6-23
