TM 5-4310-354-14
REMOVAL
STEP 1.
LOOSEN HOSE CLAMP SECURING
ENGINE AIR INTAKE ADAPTER TUBE
HOSE TO ENGINE AIR CLEANER
OUTLET. REMOVE THE HOSE FROM
THE OUTLET.
STEP 2.
LOOSEN HOSE CLAMP SECURING
COMPRESSOR INTAKE ELBOW HOSE
TO
COMPRESSOR
AIR
CLEANER
OUTLET. REMOVE THE HOSE FROM
THE OUTLET.
STEP 3.
REMOVE THE AIR CLEANER CAPS.
STEP 4.
LOOSEN CLAMP THAT SECURES AIR
CLEANER CUP ASSEMBLY TO BODY.
REMOVE CUP ASSEMBLY AND CLAMP.
STEP 5.
REMOVE
FOUR
ATTACHING
CAP
SCREWS AND LOCK WASHERS FROM
EACH OF THE TWO AIR CLEANER
ASSEMBLIES AND REMOVE THE AIR
A AIR INTAKE HOSE
CLEANERS FROM THE UNIT.
INSTALLATION
NOTE
THE ENGINE AND COMPRESSOR
AIR CLEANER ASSEMBLIES ARE
IDENTICAL AND NEED NOT BE
INSTALLED FOR SAME COMPONENT
AS REMOVED.
THE ASSEMBLIES
ARE INTERCHANGEABLE.
STEP 1.
POSITION
EACH
AIR
CLEANER
ASSEMBLY UNDER THE ROOF SECTION
WITH INLET TUBE OF AIR CLEANER
THROUGH HOLE IN ROOF.
ATTACH
EACH ASSEMBLY WITH FOUR LOCK
WASHERS AND CAP SCREWS.
STEP 2.
INSTALL AIR CLEANER CUP ASSEMBLY
ON
BODY
WITH
INSTALLATION
TS 5-4310-354-14/4-15
ARROWS POINTING UPWARD. SECURE
CUP ASSEMBLY ON BODY WITH
CLAMP. TIGHTEN CLAMP.
B AIR CLEANERS
STEP 3.
INSTALL THE AIR CLEANER CAPS.
STEP 4.
INSTALL
COMPRESSOR
INTAKE
ELBOW' HOSE ON COMPRESSOR AIR
CLEANER OUTLET AND SECURE WITH
HOSE CLAMP.
STEP 5.
INSTALL ENGINE AIR INTAKE ADAPTER
TUBE HOSE ON ENGINE AIR CLEANER
OUTLET AND SECURE WITH HOSE
CLAMP.
Figure 4-15. Engine and compressor air cleaner assemblies, removal and installation.
4-33
