TM 5-4310-354-14
A THREE-QUARTER FRONT VIEW
REMOVAL
STEP 2.
IF OIL SEPARATOR DECALS, AIR
CLEANER DECALS, NEGATIVE GROUND
STEP 1.
AS
NECESSARY,
REMOVE
SELF-
DECAL, OR FUEL DECAL WHERE
TAPPING SCREWS AND NAME PLATE.
REMOVED, REPLACE WITH NEW ONES
FUEL DECAL NEED NOT BE REMOVED
AS NECESSARY.
EXCEPT FOR REPLACEMENT.
STEP 2.
THE NEGATIVE GROUND DECAL, AIR
CLEANER DECAL, AND OIL SEPARATOR
DECALS NEED NOT BE REMOVED
EXCEPT FOR REPLACEMENT.
STEP 3.
AS NECESSARY, REMOVE THE SELF-
TAPPING
SCREWS
AND
REMOVE
IDENTIFICATION
PLATE,
SHIPPING
DATA PLATE, WARNING PLATE (ONE
EACH SIDE OF UNIT), AND OPERATING
INSTRUCTION PLATE.
INSTALLATION
STEP 1.
AS
NECESSARY,
INSTALL
THE
OPERATING INSTRUCTION PLATE, TWO
WARNING PLATES (ONE EACH SIDE OF
UNIT),
SHIPPING
DATA
PLATE,
IDENTIFICATION PLATE, AND NAME
TS 5-4310-354-14/4-16
PLATE USING FOUR SELF-TAPPING
SCREWS EACH.
B FULL REAR VIEW
Figure 4-16. Data and instruction plates, removal installation.
4-34
