TM 5-4310-354-14
4-61.
Start
and
Safety
Override
Pushbutton
4-62. Ignition On-Off Switch.
Switches.
a. Removal. Disconnect the battery ground cable
a. Removal. Disconnect battery ground cable and
and remove the ignition on-off switch as shown in I,
remove the start pushbutton switch and/or the safety
override pushbutton switch as shown in H, figure 4-34.
b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Wipe the ignition on-off-switch with a
(1) Wipe the safety switch and start switch
clean, dry cloth.
with a clean, dry cloth.
(2) Inspect the switch for proper operation.
(2) Check switches for proper operation.
Inspect for damaged terminal, cracks,
Inspect for damaged terminals, cracks,
breaks, damaged threads, or any other
breaks, damaged threads, or any other
defect.
defect.
(3) Inspect attaching hardware for distortion,
(3) Inspect attaching hardware for distortion,
damaged threads, or any other defect.
damaged threads or any other defect.
c. Installation. Install the ignition on-off switch as
c. Installation. Install the start pushbutton switch
shown in I, figure 4-34. Connect the battery ground
and/or the safety override pushbutton switch as shown in
cable.
H, figure 4-34. Connect the battery ground cable.
4-72
