TM 5-4310-376-14
3-7.
CLEANING AND INSPECTION - Continued
Use compressed air to blow dust or dirt off all components. Clean with approved clean-
ing solvent, if necessary.
Dry cleaning solvent P-D-680 (safety or Stoddard's Sol-
vent) is potentially dangerous. Avoid repeated and pro-
longed breathing of vapors and skin contact with the
liquid. Do not use near open flame, arcing equipment or
other ignition sources. Always wear eye protection and
protective clothing. The flash point of P-D-680 is 100
to 138F (30 to 59C).
3-12
