TM 5-4310-378-14
This task covers:
b. Replacement
a.
Service
Tools:
7/16-in. Wrench
Pliers, Slip Joint
10-mm Wrench
14-mm Wrench
Materials:
Brush, Cleaning
(Appendix E, item 1)
Rag, Wiping
(Appendix E, Item 3)
Solvent, Dry Cleaning
(Appendix E, item 2)
Fuel Tank Assembly
Fuel Filter Assembly
Fuel Line Assembly
I g n i t i o n switch
E q u i p m e n t Condition:
pushed in (Table 2-1, 8).
Fuel tank drained (Table 2-1, 7).
a. Service.
Combustible - do not use near open flames, near welding areas,
or on hot surfaces.
Prolonged or repeated contact of skin with liquid can cause
dermatitis. Repeated inhalation of vapor can irritate nose and
throat and can cause dizziness.
If any liquid contacts skin or eyes, immediately flush affected
a r e a thoroughly with water. Remove solvent-saturated
clothing. If vapors cause dizziness, go to fresh air.
When handling liquid or when applying it in an air-exhausted,
partially covered tank, wear approved gloves.
When handling liquid or when applying it at an unexhausted,
uncovered tank or workbench, wear approved respirator,
goggles, and gloves.
Clean fuel filter as necessary using brush, rag, and solvent.
(1)
Remove and discard bowl (l), gasket (2), and screen (3).
(2)
3-31
