TM 5-4310-368-14
b.
Service
(1)
Lay gage face down.
(2)
Remove rubber blow out plug from back of gage.
(3)
Fill gage with glycerin.
(4)
Replace rubber blow out plug.
c.
Installation
(1)
Reinstall gage to panel.
(2)
Connect 2 each mounting screws.
(3)
Connect pressure tube to gage.
4-48.
VIBRATION MOUNTS
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Applicable Configurations
All
U. S. Government Printing Office 1986-652-032/40130
Change 1
4-48.1/(4-48.2 blank)
