TM-5-4310-389-14
Figure 5-50. Removing Starter Gear Ring
NOTE
Flywheel dismantled.
1.
Apply puller No. 003-0733 and draw off radial sealing ring (figure 5-51).
2.
Mount guide piece of device onto crankshaft.
3.
Lightly grease the sealing lip of the new radial seal.
4.
Place seal in position with lip facing inwards and press in with device No. 003-2499 (figure 5-52).
Figure 5-51. Removing Radial Sealing Ring
Figure 5-52. Positioning Radial Seal
with Puller 003-0733
5-31
