e. Install (Model LP-512-ENG).
(3) Install the air compressor (par. 67).
(4) Install the safety relief valve (par.
(1) Install the air receiver tank by at-
94).
taching the capscrews (5, fig. 17),
(5) Install the globe valve (par. 101).
nuts, and washers to brackets on hand
(6) Install the air pressure gage (par.
truck assembly.
97).
(2) Install the draincock (par. 102).
(7) Install the electric motor (par. 65).
(3) Install the air pressure gage (par.
(8) Install the magnetic starter with pres-
97).
sure switch and cover (par. 70).
(4) Install the unloader valve (par. 93).
(9) Install the pressure switch tube (par.
(5) Install the aftercooler tube (par. 90).
71).
Section Vlll. WHEELS AND TIRES
106. Installation
105. Removal
a. Install plate (2) and plate (3) on tire (7)
b. Remove nut (9), and bolt (13) and remove
and tube (8).
b. Install bolt (4), washer (5) and nut (6).
wheel assembly.
c. Install wheel assembly and tighten nut (9)
c. Remove nut (6), washer (5) and bolt (4).
on bolt (13).
d. Remove plate (2) and plate (3).
d. Install washer (11) and key (12).
e. Remove tire (7) and tube (8).
